Hangzhou Fenglei Industrial Co., Ltd.
Main products:Siliconesealant, Anaerobic adhesive, AB adhesive, Gasket maker
Products
Contact Us
  • Contact Person : Mr. Wang Bentley
  • Company Name : Hangzhou Fenglei Industrial Co., Ltd.
  • Tel : 86-571-82452935
  • Fax : 86-571-82452937
  • Address : Zhejiang,Hangzhou City,Yuelian Industrial Park,Jinhua Town,Xiaoshan District
  • Country/Region : China
  • Zip : 311253

RTV Adhesive

RTV Adhesive
Product Detailed
SBOND RTV ADHESIVE High Temperatrue to 650 F (343 C) Low Volatile Perfect Oil Resistance OEM Specification Gasket Maker

PRODUCT    DESCRIPTION                                                                                                                                                  SBOND 588TM  RTV Silicone Gasket Maker provides  the following product characteristics:     

TechnologyMoisture
Chemical Type                                                         Resin /Isopropanol /  Fillers                                               
AppearanceSmooth;Brightness;no collapse
ComponentsOne part - requires no mixing
Viscosity High
CureAcetic Cure
Application

Gasket or sealing                                                                   

Product Benefits

Easy applicationIncreases reliability at high temperatures

Cuts repair timeReduces breakdownsResistant to wide range of oils,fuels, lubricants and chemicals Seals pressures up to 34 MPa

 SBOND 588TM  RTV Silicone Gasket Maker is a fast cure RTV Gasket Maker.It remains

pliable and flexible and is designed to seal flanges, threaded connections and  fasteners  at  temperatures from -45 °C to +315 °C. It can be effectively applied to cork, paper, plastic and metal surfaces.Typical applications

sealing gaskets;

flanges and threaded connections;

aircraft heating systems;

manifolds;

pipefittings;

steam lines;

gear boxes and cover plates.

Directions for use1. Clean and dry all surfaces.2. Apply SBOND 5972™ onto both surfaces and spread with spatula or putty knife.3. Assemble parts immediately while still wet. Secure or tighten to recommended torque specifications.4. Allow 3 to 5 hours before using equipment.5. Re-torque will not be necessary after the product has cured.

StorageStore product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.Optimal Storage:  8 °C to 21 °C.  Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated duringuse.  Do not return product to the original container.  HANGZHOU FENGLEI INDUSTRIAL CO.,LTD cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required,please contact your local Technical Service Center orCustomer Service Representative.

     

RTV Adhesive



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.